Guitars

Mockingbird

Evil Edge Mockingbird

Onyx - SEMGEEO

Specifications

Construction: bolt on
Body wood: Agathis
Top style: beveled
Body binding: none

Headstock style: traditional 3 to a side
Headstock color: black
Headstock binding: none
Tuners: sealed die cast

Neck wood: maple
Neck radius: 12”
Back of neck: satin natural
Neck binding: none
Nut width: 43mm

Fretboard: rosewood
Inlay: white pearloid diamonds
Frets: 24 jumbo 2.7mm
Factory strings: 9-42
Scale: 25 1/2”

Bridge type / Tailpiece type: special 1 pc connected with chrome covered brass pickguard
Pickups: 2 BC Rich humbuckers
Controls: 2 volumes, 1 tone and 1 three-way toggle
Hardware: chrome

Finish: glossy
Color: black

Masterpiece Mockingbird

Trans Red - MPMGTR

Specifications

Construction: bolt on
Body wood: agathis
Top style: deep arched
Top wood: quilted AAA veneer
Body binding: single ply white

Headstock style: traditional 3 to a side
Headstock color: matching veneer and color
Headstock binding: single ply white
Tuners: BC Rich die cast

Neck wood: maple
Back of neck: stained to match
Neck binding: single ply white
Neck profile: standard BC Rich C
Nut width: 43 mm

Fretboard: rosewood
Inlay: white pearloid block
Frets: 24 jumbo 2.7mm
Scale: 24 5/8”

Bridge type: Tune O Matic
String termination: string through
Pickups: 2 B.C. Rich B.D.S.M. humbuckers
Controls: two volumes, one tone and one 3 way toggle
Hardware: chrome

Finish: Transparent
Top wood: AAA quilted maple veneer
Colors: Sunfire or Dragon Blood

Mockingbird Special

Onyx - SMGO

White - SMGW

Specifications

Construction: neck through
Body wood: mahogany
Top style: deep arched
Top wood: ½” maple cap with AAA quilted maple veneer
Body binding: (white) black multi-ply / back = taper cut Body side thickness: 39.48mm / (black)
Body side thickness: 39.48mm
Body center thickness: 51.57mm


Headstock style: traditional 3 to a side
Headstock color: (white) white / (onyx) Onyx
Headstock binding: (white) black multi-ply / (onyx) white multi-ply
Headstock tilt: 14 degrees
Tuners: Grover Rotomatic


Neck wood: mahogany
Neck radius: 12”
Back of neck: painted to match
Neck binding: (white) one ply black / (onyx) one ply white
Nut width: 43mm
Neck width at 12th fret: 2.062”


Fretboard: ebony
Inlay: white pearloid cloud
Frets: 22 jumbo 2.7mm
Factory strings: 10 - 46
Scale: 24 ¾”


Bridge type: Tone Pros tune o matic
Tailpiece type: Tone Pros stop bar
Pickups: 2 chrome covered Rockfield SWV vintage humbuckers
Controls: 2 volumes, 2 tones and 1 top bout three-way toggle
Hardware: (white) black chrome / (onyx) chrome


Finish: painted glossy
Color: White & Onyx

NJ Classic Mockingbird

NJCMGTBL - Trans Blue

NJCMGTR - Trans Red

Specifications

Construction: neck through
Body wood: nato (eastern mahogany)
Body top: AAA quilted veneer (stained sides with natural center) with walnut stringers
Body thickness: 45mm
Top style: beveled
Body binding: no

Headstock style: traditional 3 to a side
Headstock color: Rosewood faced stained to match
Headstock binding: white one ply
Tuners: diecast

Neck wood: maple
Back of neck: natural glossy
Neck binding: white one ply

Fretboard: ebony
Inlay: white pearloid cloud
Frets: 24 jumbo 2.7mm
Factory strings: 9 - 42
Nut: 43mm
Scale: 25 1/2”

Bridge: tune o matic
Tailpiece: stop bar
Pickups: 2 B.C. Rich B.D.S.M. cream humbuckers
Controls: 2 volumes, 1 three-way toggle and 1 tone
Hardware: chrome

Finish: stained glossy
Color: trans red AAA quilted maple with walnut stringers and natural center section or trans red AAA quilted maple with walnut stringers and natural center section

Mockingbird Special X

Ghost Black - SXMGGBK

Specifications

Construction: neck through
Body wood: mahogany
Top style: deep arched
Top wood: ½” maple cap with AAA quilted maple veneer
Body binding: top = white multi-ply / back = taper cut
Body side thickness: 39.48mm
Body center thickness: 51.57mm


Headstock style: traditional 3 to a side
Headstock color: (Cherry Sunburst) black / (Ghost Black) ghost black
Headstock binding: white multi-ply
Headstock tilt: 14 degrees
Tuners: Grover Rotomatic


Neck wood: mahogany
Neck radius: 12”
Back of neck: stain to match
Neck binding: white one ply
Nut width: 43mm
Neck width at 12th fret: 2.062”


Fretboard: ebony
Inlay: white pearloid cloud
Frets: 22 jumbo 2.7mm
Factory strings: 10 - 46
Scale: 24 ¾”


Bridge type: Tone Pros tune o matic
Tailpiece type: Tone Pros stop bar
Pickups: 2 chrome covered Rockfield SWV vintage humbuckers
Controls: 2 volumes, 2 tones and 1 top bout three-way toggle
Hardware: chrome


Finish: stained trans glossy
Color: cherry sunburst & ghost (lighter stained trans black)

Exotic Classic Mockingbird

Spalt - XCMGSM

Natural - XCMGQ

Specifications

Construction: neck through
Body wood: nato
Top style: beveled
Body binding: no

Headstock style: traditional 3 to a side
Headstock color: matching veneer and color
Headstock binding: single ply cream
Tuners: B.C. Rich die cast

Neck wood: maple
Back of neck: clearcoat
Neck binding: single ply cream
Neck profile: standard BC Rich C
Nut width: 43 mm

Fretboard: ebony
Inlay: white pearloid cloud
Frets: 24 jumbo 2.7mm
Scale: 24 5/8”

Bridge type: Tune O Matic
String termination: stop bar
Pickups: 2 Rockfield zebra mafia humbuckers
Controls: two volumes, one tone and one 3 way toggle
Hardware: chrome

Finish: natural
Colors: spalted maple veneer with ebony stringers or koa veneer with maple stringers

Mockingbird ST

Trans Red - MGSTTR

Specifications

Construction: neck through
Body wood: nato (eastern mahogany) with ebony stringers
Body thickness: 45mm
Top style: beveled
Top wood: AAA quilted maple veneer
Body binding: no

Headstock style: traditional 3 to a side
Headstock color: natural rosewood faced
Headstock binding: no
Tuners: Grover super Rotomatics

Neck wood: maple
Neck radius: 12”
Back of neck: stain to match
Neck binding: no
Nut width: 43mm locking

Fretboard: Ebony
Inlay: small white pearloid diamonds
Frets: 24 jumbo 2.7mm
Factory strings: 9 - 46
Scale: 24 5/8”

Bridge type: Floyd Rose original tremolo
Pickups: 2 black open Rockfield mafia humbuckers
Controls: 2 volumes, 1 tone, 1 three-way toggle, individual mini switches for pickup coil tap and reverse phase, and one 5 position varitone tone filter. (All passive)
Hardware: black

Finish: stained trans glossy
Color: stained trans red AAA quilted maple with ebony stringers

Calibre Classic Mockingbird

Masterpiece Bich

Specifications

Construction: bolt on
Body wood: agathis
Top style: deep arched
Top wood: quilted AAA veneer
Body binding: single ply white

Headstock style: traditional 3 to a side
Headstock color: matching veneer and color
Headstock binding: single ply white
Tuners: BC Rich die cast

Neck wood: maple
Back of neck: stained to match
Neck binding: single ply white
Neck profile: standard BC Rich C
Nut width: 43 mm

Fretboard: rosewood
Inlay: white pearloid block
Frets: 24 jumbo 2.7mm
Scale: 24 5/8”

Bridge type: Tune O Matic
String termination: string through
Pickups: 2 B.C. Rich B.D.S.M. humbuckers
Controls: two volumes, one tone and one 3 way toggle
Hardware: chrome

Finish: Transparent
Colors: Sunfire or Dragon Blood

SE Bich Metal Web

Onyx - SEBGMWO

Specifications

Construction: neck through
Body wood: nato (eastern mahogany)
Body thickness: 45mm
Top style: beveled
Body binding: no

Headstock style: Widow
Headstock color: onyx
Headstock binding: no
Tuners: diecast

Neck wood: maple
Back of neck: onyx
Neck binding: no

Fretboard: ebony
Inlay: large white pearloid spiders
Frets: 24 jumbo 2.7mm
Factory strings: 9 – 42
Nut: 43mm
Scale: 25 1/2”

Bridge: Tune o matic
Tailpiece: stop bar
Pickups: 2 black B.C. Rich B.D.S.M. humbuckers
Controls: 2 volumes, 1 three-way toggle and 1 tone
Hardware: chrome

Special features: The top of the body has a custom chrome metal web design and there are matching chrome metal web pieces on the headstock
Finish: painted glossy
Color: onyx with chrome spider web design

NJ Classic Bich

Trans Blue - NJCBGTBL

Trans Red - NJCBGTR

Specifications

Construction: neck through
Body wood: nato (eastern mahogany)
Body top: AAA quilted veneer (stained sides with natural center) with walnut stringers
Body thickness: 45mm
Top style: beveled
Body binding: no

Headstock style: traditional 3 to a side
Headstock color: rosewood overlay
Headstock binding: white one ply
Tuners: diecast

Neck wood: maple
Back of neck: natural glossy
Neck binding: white one ply

Fretboard: ebony
Inlay: white pearloid cloud
Frets: 24 jumbo 2.7mm
Factory strings: 9 - 42
Nut: 43mm
Scale: 25 1/2”

Bridge: tune o matic
Tailpiece: stop bar
Pickups: 2 B.C. Rich B.D.S.M. cream humbuckers
Controls: 2 volumes, 1 three-way toggle and 1 tone
Hardware: chrome

Finish: stained glossy
Color: trans red AAA quilted maple with walnut stringers and natural center section or trans blue AAA quilted maple with walnut stringers and natural center section

Exotic Classic Bich

Spalt - XCBGSM

Koa - XCBGK

Quilt - XCBGQ

Specifications

Construction: neck through
Body wood: nato
Top style: beveled
Body binding: no

Headstock style: traditional 3 to a side
Headstock color: matching veneer and color
Headstock binding: single ply cream
Tuners: B.C. Rich die cast

Neck wood: maple
Back of neck: clearcoat
Neck binding: single ply cream
Neck profile: standard BC Rich C
Nut width: 43 mm

Fretboard: ebony
Inlay: white pearloid cloud
Frets: 24 jumbo 2.7mm
Scale: 24 5/8”

Bridge type: Tune O Matic
String termination: string through
Pickups: 2 Rockfield zebra mafia humbuckers
Controls: two volumes, one tone and one 3 way toggle
Hardware: chrome

Finish: natural
Colors: spalted maple veneer with ebony stringers or koa veneer with maple stringers

Calibre Classic Bich

Natural - CCBGN

Trans Red - CCBGTR

Specifications

Construction: neck through
Body wood: nato (eastern mahogany) with AAAA quilted maple cap (10.77mm thick) / walnut stringers on natural – ebony stringers on trans red
Body thickness: 40mm
Top style: beveled
Body binding: no

Headstock style: traditional 3 to a side
Headstock color: stain to match AAAA quilted maple
Headstock binding: white one ply
Headstock pitch: 14 degrees
Tuners: Schaller

Neck wood: maple
Back of neck: stain to match
Neck binding: white one ply

Fretboard: ebony
Inlay: white pearl clouds
Frets: 24 jumbo 2.7mm
Factory strings: 9 – 42
Nut: 43mm
Scale: 24 5/8”

Bridge: tune o matic
Tailpiece: stop bar
Pickups: 2 black Rockfield mafia humbuckers
Controls: 2 volumes, 1 three-way toggle and 1 tone
Hardware: chrome

Special features: ALL Schaller hardware and special white pearl guitar shaped R logo
Finish: stained trans clear glossy
Color: Trans red AAAA quilted maple with ebony stringers or natural AAAA quilted maple with walnut stringers

Exotic Classic Bich 10

Natural - XCB10SM

 

Natural Koa - XCB10K

Specifications

Construction: neck through
Body wood: nato
Top style: beveled
Body binding: no

Headstock style: traditional 3 to a side
Headstock color: matching veneer and color
Headstock binding: single ply cream
Tuners: B.C. Rich die cast

Neck wood: maple
Back of neck: clearcoat
Neck binding: single ply cream
Neck profile: standard BC Rich C
Nut width: 43 mm

Fretboard: ebony
Inlay: white pearloid cloud
Frets: 24 jumbo 2.7mm
Scale: 24 5/8”

Bridge type: Tune O Matic
Pickups: 2 Rockfield zebra mafia humbuckers
Controls: Controls: two volumes, one tone and one 3 way toggle
Hardware: chrome

Finish: natural or trans
Colors: spalted maple veneer with ebony stringers or koa veneer with maple stringers

Bich 10

Onyx - B10GO

Specifications

Construction: neck through
Body wood: basswood
Top style: beveled
Body binding: no

Headstock style: traditional 3 to a side
Headstock color: painted onyx
Headstock binding: no
Tuners: B.C. Rich die cast

Neck wood: maple
Back of neck: painted onyx
Neck binding: no
Neck profile: standard BC Rich C
Nut width: 43 mm

Fretboard: ebony
Inlay: small diamond
Frets: 24 jumbo 2.7mm
Scale: 24 5/8”

Bridge type: B.C. Rich Quad
Pickups: 2 Rockfield black mafia humbuckers
Controls: two volumes, one tone and one 3 way toggle
Hardware: chrome

Finish: painted
Colors: onyx

Perfect 10 Bich

Natural - P10BGN

Dragon Blood - P10BGDB

Specifications

Construction: neck through
Body wood: nato
Top style: beveled
Body binding: no

Headstock style: traditional 3 to a side
Headstock color: matching veneer and color
Headstock binding: single ply white
Tuners: B.C. Rich die cast (10)

Neck wood: maple
Back of neck: clearcoat
Neck binding: single ply white
Neck profile: standard BC Rich C
Nut width: 43 mm

Fretboard: ebony
Inlay: white pearloid cloud
Frets: 24 jumbo 2.7mm
Scale: 24 5/8”

Bridge type: B.C. Rich Quad
Pickups: 2 Rockfield black mafia humbuckers
Controls: two volumes, one tone, one 3 way toggle, individual coil tap and reverse phase mini switches and a 5 position varitone filter (passive)
Hardware: chrome

Finish: natural or trans
Colors: AAA quilted maple veneer with walnut stringers or dragon blood AAA quilted maple veneer with ebony stringers

Warlock

Warlock Guitar

Black - WGBK

Specifications

Construction: bolt on
Body wood: agathis
Body thickness: 45mm
Top style: beveled
Body binding: no

Headstock style: 6 in line pointed
Headstock color: onyx
Headstock binding: no
Tuners: diecast

Neck wood: maple
Back of neck: natural satin
Neck binding: no

Fretboard: rosewood
Inlay: white pearloid dots
Frets: 24 jumbo 2.7mm
Factory strings: 9 - 42
Nut: 43mm
Scale: 25 1/2”

Bridge type / Tailpiece type: wrap around adjustable
Pickups: 2 black humbuckers
Controls: 1 volume, 1 three-way toggle and 1 tone.
Hardware: chrome

Finish: painted glossy
Color: black

Metal Master Warlock

Tribal Fire - MMWTF

Red Blade- MMWGBKRD

Silver Blade - MMWGBKS

Specifications

Construction: bolt on
Body wood: basswood
Top style: beveled
Body binding: no

Headstock style: SOB Beast style
Headstock color: black
Headstock binding: no
Tuners: B.C. Rich diecast

Neck wood: rosewood
Back of neck: natural satin
Neck binding: no
Nut width: 43mm

Fretboard: rosewood
Inlay: white pearloid dots
Frets:24 jumbo 2.7mm
Factory strings: 9 - 42
Scale: 25 1/2”

Bridge / tailpiece type: wrap around adjustable
Pickups: 2 B.D.S.M. B.C. Rich humbuckers
Controls: one volume, one tone and 1 three-way toggle
Hardware: chrome

Finish: painted glossy
Color: black with red tribal fire graphic

Revenge Warlock

Onyx - RWGO

White - RWGW

Specifications

Construction: bolt on
Body wood: Agathis
Body thickness: 45mm
Top style: flat
Body binding: white binding on onyx guitar and black binding on white guitar

Headstock style: Widow
Headstock color: painted to match
Headstock binding: no
Tuners: B.C. Rich diecast

Neck wood: maple
Back of neck: natural satin
Neck binding: no

Fretboard: rosewood
Inlay: small white pearloid diamonds
Frets: 24 jumbo 2.7mm
Factory strings: 9 – 42
Nut: 43mm
Scale: 25 1/2”

Bridge: Tune o matic
Tailpiece: stop bar
Pickups: 2 black B.C. Rich B.D.S.M. humbuckers
Controls: 1 volume, 1 three-way toggle and 1 tone
Hardware: chrome

Finish: painted glossy
Color: onyx with white body binding and white with black body binding

Kerry King Wartribe

Black w/Red Fire - KKWGW1

Specifications

Construction: bolt on
Body wood: basswood
Body thickness: 45mm
Top style: beveled
Body binding: no

Headstock style: Beast
Headstock color: onyx with red fire graphic
Headstock binding: no
Tuners: B.C. Rich diecast

Neck wood: Canadian hard maple
Back of neck: satin natural
Neck binding: no

Fretboard: rosewood
Inlay: white pearloid wartribe tribal at the 12th fret only
Frets: 24 jumbo 2.7mm
Factory strings: 9 – 42
Nut: 43mm locking Floyd Rose style
Scale: 25 1/2”

Bridge / tailpiece type: Kahler Hybrid Tremolo
Pickups: 2 B.D.S.M. B.C. Rich humbuckers
Controls: 1 volume, 1 three-way toggle and 1 tone
Hardware: black

Finish: painted glossy
Color: onyx with red fire graphic

Dark Arts Warlock

Blood - DAWGB

Onyx - DAWGO

Specifications

Construction: neck through
Body wood: agathis
Body thickness: 40mm
Top style: plateau arched
Body binding: black binding on blood guitar and white binding on onyx guitar

Headstock style: Widow
Headstock color: paint to match
Headstock binding: no
Tuners: diecast

Neck wood: maple
Back of neck: paint to match
Neck binding: no

Fretboard: rosewood
Inlay: large white pearloid diamonds
Frets: 24 jumbo 2.7mm
Factory strings: 9 – 42
Nut: 43mm
Scale: 25 1/2”

Bridge: Tune o matic
Tailpiece: string through the body
Pickups: 2 black humbuckers (direct mounted)
Controls: 1 volume, 1 three-way toggle and 1 tone
Hardware: black

Finish: painted glossy
Color: onyx or blood

IT Warlock

Shadow - SEWGITS

Satin Red - WGITSR

Specifications

Construction: special B.C. Rich I.T. neck system
Body wood: nato (eastern mahogany)
Body thickness: 45mm
Top style: beveled (shadow black) / flat (satin red)
Body binding: multi-ply black on the flat red

Headstock style: Widow
Headstock color: shadow (flat black)
Headstock binding: no
Tuners: B.C. Rich diecast

Neck wood: hard maple
Back of neck: natural satin
Neck binding: no

Fretboard: ebony
Inlay: 1 white pearloid Widow headstock at the 7th fret
Frets: 24 jumbo 2.7mm
Factory strings: 9 – 42
Nut: 43mm
Scale: 25 1/2”

Bridge: tune o matic
Tailpiece: string through the body
Pickups: 2 black B.C. Rich B.D.S.M. humbuckers
Controls: 2 volume, 1 three-way toggle and 1 tone
Hardware: black

Special features: unique IT neck system
Finish: painted flat
Color: Flat red with multi-ply black binding or shadow (flat black)

NT Warlock

Onyx - NTWGO

Specifications

Construction: Neck through
Body wood: nato (eastern mahogany)
Body thickness: 45mm
Top style: beveled
Body binding: no

Headstock style: Widow
Headstock color: onyx
Headstock binding: no
Tuners: diecast

Neck wood: maple
Back of neck: onyx
Neck binding: no

Fretboard: ebony
Inlay: white pearloid small diamond
Frets: 24 jumbo 2.7mm
Factory strings: 9 - 42
Nut: 43mm locking
Scale: 25 1/2”

Bridge / Tailpiece: Floyd Rose original tremolo
Pickups: 2 B.C. Rich B.D.S.M. humbuckers
Controls: 2 volumes, 1 tone and 1 three-way toggle
Hardware: black

Finish: painted glossy
Color: onyx

SE Warlock Metal Web

Onyx - SEWGMWO

Specifications

Construction: neck through
Body wood: nato (eastern mahogany)
Body thickness: 45mm
Top style: beveled
Body binding: no

Headstock style: Widow
Headstock color: onyx
Headstock binding: no
Tuners: diecast

Neck wood: maple
Back of neck: onyx
Neck binding: no

Fretboard: ebony
Inlay: large white pearloid spiders
Frets: 24 jumbo 2.7mm
Factory strings: 9 – 42
Nut: 43mm
Scale: 25 1/2”

Bridge: Tune o matic
Tailpiece: stop bar
Pickups: 2 black B.C. Rich B.D.S.M. humbuckers
Controls: 2 volumes, 1 three-way toggle and 1 tone
Hardware: chrome

Special features: The top of the body has a custom chrome metal web design and there are matching chrome metal web pieces on the headstock
Finish: painted glossy
Color: onyx with chrome spider web design

Exotic Warlock

Spalted Maple - XWGSM

Specifications

Construction: neck through
Body wood: nato (eastern mahogany)
Body thickness: 45mm
Top style: flat
Top wood: spalted maple veneer
Body binding: cream one ply

Headstock style: Widow
Headstock color: spalted maple veneer
Headstock binding: no
Tuners: B.C. Rich diecast

Neck wood: maple
Neck radius: 12”
Back of neck: glossy natural
Neck binding: no
Nut width: 43mm

Fretboard: rosewood
Inlay: large white pearloid diamonds
Frets: 24 jumbo 2.7mm
Factory strings: 9 - 46
Scale: 25 1/2”

Bridge type: Tune o matic
Tailpiece type: string through
Pickups: 1 black Rockfield Fat Ass humbucker
Controls: 1 volume and 1 tone
Hardware: black

Finish: clear glossy
Color: natural spalted maple

Kerry King Signature Wartribe

Fire Graphic- KKSWGW1

Specifications

Construction: neck through
Body wood: maple
Body thickness: 45mm
Top style: beveled
Body binding: no

Headstock style: Beast
Headstock color: black with red fire graphic
Headstock binding: no
Tuners: Grover mini-Rotomatics

Neck wood: Canadian hard maple
Back of neck: black
Neck binding: no

Fretboard: ebony
Inlay: abalone tribal
Frets: 24 jumbo 2.7mm
Factory strings: 9 – 42
Nut: 43mm locking Floyd Rose style
Scale: 25 1/2”

Bridge / tailpiece type: Kahler Hybrid Tremolo
Pickups: 1 EMG 81 bridge and 1 EMG 85 neck humbuckers with PA2 pre amp
Controls: 1 volume, 1 three-way toggle, 1 tone and 1 toggle to activate the PA2 pre amp
Hardware: black

Finish: painted glossy
Color: black with red fire graphic

Calibre Warlock

Onyx - CWGO

Specifications

Construction: neck through
Body wood: nato (eastern mahogany)
Body thickness: 45mm
Top style: beveled
Body binding: no

Headstock style: Widow
Headstock color: onyx
Headstock binding: white one ply
Tuners: Schaller

Neck wood: maple
Back of neck: onyx
Neck binding: white one ply

Fretboard: ebony
Inlay: large white pearl diamonds
Frets: 24 jumbo 2.7mm
Factory strings: 9 – 42
Nut: 43mm locking
Scale: 24 5/8”

Bridge / Tailpiece: Floyd Rose original tremolo
Pickups: 2 black Rockfield mafia humbuckers
Controls: 2 volumes, 1 three-way toggle and 1 tone
Hardware: black

Special features: ALL Schaller hardware, special white pearl guitar shaped R logo
Finish: painted glossy
Color: onyx

Red Bevel Warlock Pack

Red Bevel - WGREBKPK

Specifications

Construction: bolt on
Body wood: agathis
Body thickness: 45mm
Top style: beveled
Body binding: no

Headstock style: Widow
Headstock color: black
Headstock binding: no
Tuners: diecast

Neck wood: maple
Back of neck: natural satin
Neck binding: no

Fretboard: rosewood
Inlay: white pearloid dots
Frets: 24 jumbo 2.7mm
Factory strings: 9 - 42
Nut: 43mm
Scale: 25 1/2”

Bridge / Tailpiece: adjustable wrap around
Pickups: 2 black humbucker
Controls: 1 volume, 1 three-way toggle and 1 tone
Hardware: chrome

Special features: Full color POP box, comes with matching red 10 watt B.C. Rich “Insinerator” amp
Finish: painted glossy
Color: onyx with red bevels

Dagger

SE Dagger Semi Hollow

Blood w/Black Binding - SEDGB

Specifications

Construction: fixed heel
Body wood: maple laminate
Body thickness: 1.75”
Body width: 16.5”
Top style: deep arched
Back: deep arched
Body binding: black binding front and back edges

Headstock style: Widow
Headstock color: onyx
Headstock binding: no
Tuners: diecast

Neck wood: North American maple
Back of neck: blood
Neck binding: no

Fretboard: ebony
Inlay: white pearloid dagger tips
Frets: 22 jumbo 2.7mm
Factory strings: 10 – 52
Scale: 24 3/4”

Bridge: Tune o matic
Tailpiece: stop bar
Pickups: 2 open black B.C. Rich humbuckers
Controls: 2 volumes, 1 three-way toggle and 1 tone
Hardware: black

Special features: Solid maple center block, dagger shaped sound holes and fits in any traditional thin body electric case
Finish: painted glossy
Color: blood

Beast

Avenge SOB

Onyx - ASOBO

Specifications

Construction: bolt on
Body wood: basswood
Body thickness: 40mm
Top style: beveled
Body binding: no

Headstock style: SOB Beast
Headstock color: onyx with red painted edge
Headstock binding: no
Tuners: B.C. Rich diecast

Neck wood: maple
Back of neck: natural satin
Neck binding: no

Fretboard: rosewood
Inlay: red beast wing
Frets: 24 jumbo 2.7mm
Factory strings: 9 – 42
Nut: 43mm
Scale: 25 1/2”

Bridge: Tune o matic
Tailpiece: string through the body
Pickups: 1 black B.C. Rich B.D.S.M. humbucker
Controls: 1 volume
Hardware: black

Finish: painted glossy
Color: onyx with painted red bevels

IT Beast

Shadow - SEBSTGITS

Specifications

Construction: special B.C. Rich I.T. neck system
Body wood: nato (eastern mahogany)
Body thickness: 45mm
Top style: flat
Body binding: multi-ply off white

Headstock style: Widow
Headstock color: shadow (flat black)
Headstock binding: no
Tuners: B.C. Rich diecast

Neck wood: hard maple
Back of neck: natural satin
Neck binding: no

Fretboard: ebony
Inlay: 1 white pearloid Widow headstock at the 7th fret
Frets: 24 jumbo 2.7mm
Factory strings: 9 – 42
Nut: 43mm
Scale: 25 1/2”

Bridge: tune o matic
Tailpiece: string through the body
Pickups: 2 black B.C. Rich B.D.S.M. humbuckers
Controls: 1 volume, 1 three-way toggle and 1 tone
Hardware: black

Special features: unique IT neck system
Finish: painted flat
Color: shadow (flat black) with off white multi-ply binding

NT Beast

Onyx - NTBSTGO

Specifications

Construction: Neck through
Body wood: nato (eastern mahogany)
Body thickness: 45mm
Top style: beveled
Body binding: no

Headstock style: Beast
Headstock color: onyx
Headstock binding: no
Tuners: diecast

Neck wood: maple
Back of neck: onyx
Neck binding: no

Fretboard: ebony
Inlay: white pearloid small diamond
Frets: 24 jumbo 2.7mm
Factory strings: 9 - 42
Nut: 43mm locking
Scale: 25 1/2”

Bridge / Tailpiece: Floyd Rose original tremolo
Pickups: 2 B.C. Rich B.D.S.M. humbuckers
Controls: 1 volume, 1 tone and 1 three-way toggle
Hardware: black

Finish: painted glossy
Color: onyx

WMD SOB

Onyx - WSOBGO

Specifications

Construction: neck through
Body wood: nato (eastern mahogany)
Body thickness: 40mm
Top style: beveled
Body binding: no

Headstock style: SOB Beast
Headstock color: onyx
Headstock binding: no
Tuners: Grover Rotomatics

Neck wood: maple
Back of neck: onyx
Neck binding: no

Fretboard: ebony
Inlay: none
Frets: 24 jumbo 2.7mm
Factory strings: 9 – 42
Nut: 43mm
Scale: 25 1/2”

Bridge: tune o matic
Tailpiece type: string through body
Pickups: 1 Rockfield Fat Ass (bridge) and 1 black Rockfield mafia (neck) humbuckers
Controls: 1 volume, 1 three-way toggle and 1 tone
Hardware: black chrome

Finish: painted glossy
Color: onyx with red pinstripes on the body edges

Eagle

Classic Deluxe Eagle

Black Burst - CDEGBKB

Dragon Blood - CDEGDB

Specifications

Construction: neck through
Body wood: nato (eastern mahogany) with 18mm arched maple cap and AAA quilted maple veneer top
Body thickness: 40mm
Top style: deep arched
Body binding: white multi-ply and white pearloid perfling and white pearloid inlaid stringers

Headstock style: traditional 3 to a side
Headstock color: paint to match with AAA quilted maple veneer
Headstock binding: white multi-ply and white pearloid perfling
Tuners: Grover Super Rotomatics (stair stepped buttons)

Neck wood: maple
Back of neck: paint to match
Neck binding: white multi-ply binding and white pearloid fingerboard side runners

Fretboard: ebony
Inlay: white pearloid eagle in flight
Frets: 24 jumbo 2.7mm
Factory strings: 9 – 42
Nut: 43mm
Scale: 25 1/2”

Bridge: Tune o matic
Tailpiece: stop bar
Pickups: 2 chrome covered Rockfield SWV vintage humbuckers
Controls: 2 volumes, 1 three-way toggle, 1 tone and 2 individual mini switches for individual pickup coil tapping
Hardware: chrome

Special features: white pearloid capped rotary knobs and chrome pickup bezels
Finish: stained trans glossy
Color: dragon blood or black burst

V

Metal Master Kerry King V

Tribal Fire - MMVTF

Specifications

Construction: bolt on
Body wood: basswood
Top style: beveled
Body binding: no

Headstock style:Widow
Headstock color: black
Headstock binding: no
Tuners: B.C. Rich diecast

Neck wood: maple
Back of neck: natural satin
Neck binding: no
Nut width: 43mm

Fretboard: rosewood
Inlay: white pearloid dots
Frets: 24 jumbo 2.7mm
Factory strings: 9 - 42
Scale: 25 1/2”

Bridge / tailpiece type: wrap around adjustable
Pickups: 2 B.D.S.M. B.C. Rich humbuckers
Controls: 1 volume, 1 tone and 1 three-way toggle
Hardware: chrome

Finish: painted glossy
Color: black with white tribal fire graphic

Kerry King V

KK Custom - KKVGT

Specifications

Construction: bolt on
Body wood: basswood
Body thickness: 45mm
Top style: beveled
Body binding: no

Headstock style: Widow
Headstock color: onyx
Headstock binding: no
Tuners: B.C. Rich diecast

Neck wood: Canadian hard maple
Back of neck: natural satin
Neck binding: no
Fretboard: rosewood
Inlay: KKV at the 12th fret
Frets: 24 jumbo 2.7mm
Factory strings: 9 – 42
Nut: 43mm locking Floyd Rose style
Scale: 25 1/2”

Bridge / Tailpiece: Kahler Hybrid Tremolo
Pickups: 2 B.D.S.M. B.C. Rich humbuckers
Controls: 2 volumes, 1 three-way toggle and 1 tone
Hardware: black

Finish: painted glossy
Color: onyx with white tribal graphic

IT Jr. V

Shadow - SEJRVGITS

Satin Red - JRVGITSR

Specifications

Construction: special B.C. Rich I.T. neck system
Body wood: nato (eastern mahogany)
Body thickness: 45mm
Top style: flat
Body binding: multi-ply off white on the shadow model or multi-ply black on the flat red

Headstock style: Widow
Headstock color: shadow (flat black)
Headstock binding: no
Tuners: B.C. Rich diecast

Neck wood: hard maple
Back of neck: natural satin
Neck binding: no

Fretboard: ebony
Inlay: 1 white pearloid Widow headstock at the 7th fret
Frets: 24 jumbo 2.7mm
Factory strings: 9 – 42
Nut: 43mm
Scale: 25 1/2”

Bridge: tune o matic
Tailpiece: string through the body
Pickups: 2 black B.C. Rich B.D.S.M. humbuckers
Controls: 1 volume, 1 three-way toggle and 1 tone
Hardware: black

Special features: unique IT neck system
Finish: painted flat
Color: Flat red with multi-ply black binding or shadow (flat black) with off white multi-ply binding

NT Jr. V

Onyx - NTJRVGO

Specifications

Construction: Neck through
Body wood: nato (eastern mahogany)
Body thickness: 45mm
Top style: beveled
Body binding: no

Headstock style: Widow
Headstock color: onyx
Headstock binding: no
Tuners: diecast

Neck wood: maple
Back of neck: onyx
Neck binding: no

Fretboard: ebony
Inlay: white pearloid small diamond
Frets: 24 jumbo 2.7mm
Factory strings: 9 - 42
Nut: 43mm locking
Scale: 25 1/2”

Bridge / Tailpiece: Floyd Rose original tremolo
Pickups: 2 B.C. Rich B.D.S.M. humbuckers
Controls: 1 volume, 1 tone and 1 three-way toggle
Hardware: black

Finish: painted glossy
Color: onyx

Kerry King Signature V

KK Custom - KKSVGT

Specifications

Construction: neck through
Body wood: maple
Body thickness: 45mm
Top style: beveled
Body binding: no

Headstock style: Widow
Headstock color: onyx with white tribal graphic
Headstock binding: no
Tuners: Grover mini-Rotomatics

Neck wood: Canadian hard maple
Back of neck: onyx
Neck binding: no

Fretboard: ebony
Inlay: abalone tribal
Frets: 24 jumbo 2.7mm
Factory strings: 9 – 42
Nut: 43mm locking Floyd Rose style
Scale: 25 1/2”

Bridge / tailpiece type: Kahler Hybrid Tremolo
Pickups: 1 EMG 81 bridge and 1 EMG 85 neck humbuckers with PA2 pre amp
Controls: 1 volume, 1 three-way toggle, 1 tone and 1 toggle to activate the PA2 pre amp
Hardware: black

Finish: painted glossy
Color: onyx with white tribal graphic

Draco

Onyx - DVGO

Specifications

Construction: neck through
Body wood: nato (eastern mahogany)
Body thickness: 45mm
Top style: extremely beveled
Body binding: no

Headstock style: SOB Beast
Headstock color: onyx
Headstock binding: no
Tuners: Grover™ Rotomatic

Neck wood: maple
Back of neck: onyx
Neck binding: black

Fretboard: ebony
Inlay: white pearloid vertebrae
Frets: 24 jumbo 2.7mm
Factory strings: 9 - 42
Nut: 43mm
Scale: 25 1/2”

Bridge: tune o matic
Tailpiece: string through the body
Pickups: 1 Rockfield Fat Ass humbucker (bridge) and 1 twin rail (neck)
Controls: 1 volume (volume is a push pull to change pickups)
Hardware: black chrome

Special features: output jack is located on the upper wing in the back for comfort and style
Finish: painted glossy
Color: onyx

Virgin

VG1

Black - VGIBK

White - VGIW

Specifications

Construction: bolt on
Body wood: agathis
Top style: beveled
Body binding: no

Headstock style: Widow
Headstock color: black
Headstock binding: no
Tuners: B.C. Rich diecast

Neck wood: rosewood
Back of neck: natural satin
Neck binding: no
Nut width: 43mm

Fretboard: rosewood
Inlay: white pearloid dots
Frets: 24 jumbo 2.7mm
Factory strings: 9 - 42
Scale: 25 1/2”

Bridge / tailpiece type: wrap around adjustable
Pickups: 2 B.D.S.M. B.C. Rich humbuckers
Controls: 1 volume, 1 tone and 1 three-way toggle
Hardware: chrome

Finish: painted glossy
Color: black or white

Virgo

Virgo Vintage Celtic

Onyx - VOGO

Specifications

Construction: bolt on
Body wood: nato (eastern mahogany)
Body thickness: 45mm
Top style: beveled
Body binding: no

Headstock style: SOB Beast
Headstock color: onyx
Headstock binding: no
Tuners: B.C. Rich diecast

Neck wood: maple
Back of neck:onyx
Neck binding: no

Fretboard: ebony
Inlay: white pearloid Celtic
Frets: 24 jumbo 2.7mm
Factory strings: 9 – 42
Nut: 43mm
Scale: 25 1/2”

Bridge: Tune o matic
Tailpiece: string through the body
Pickups: 2 distressed pewter covered B.C. Rich humbuckers
Controls: 1 volume, 1 three-way toggle and 1 tone
Hardware: distressed pewter

Special features: Celtic control knobs
Finish: painted glossy
Color: onyx

Warbeast

Warbeast

Onyx - WBSTGBK

Specifications

Construction: bolt on
Body wood: basswood
Top style: beveled
Body binding: none

Headstock style: SOB 3 to a side
Headstock color: black
Headstock binding: none
Tuners: sealed die cast

Neck wood: maple
Neck radius: 12”
Back of neck: satin
Neck binding: none
Nut width: 43mm

Fretboard: rosewood
Inlay: none
Frets: 22 jumbo 2.7mm
Factory strings: 9-42
Scale: 25 1/2”

Bridge type: Tune o matic
Tailpiece type: string through body
Pickups: 2 black plastic covered BC Rich humbuckers
Controls: 1 volume, 1 tone and 1 three-way toggle
Hardware: chrome

Finish: glossy
Color: black

WMD Warbeast

Onyx - WWBSTGO

Specifications

Construction: neck through
Body wood: nato (eastern mahogany)
Body thickness: 45mm
Top style: side beveled
Body binding: no

Headstock style: SOB Beast
Headstock color: onyx
Headstock binding: no
Tuners: Grover Rotomatics

Neck wood: maple
Back of neck: onyx
Neck binding: no

Fretboard: ebony
Inlay: none
Frets: 24 jumbo 2.7mm
Factory strings: 9 – 42
Nut: 43mm locking
Scale: 25 1/2”

Bridge / Tailpiece type: Floyd Rose original tremolo
Pickups: 1 Rockfield Fat Ass (bridge) and 1 black Rockfield mafia (neck) humbuckers
Controls: 1 volume, 1 three-way toggle and 1 tone
Hardware: black chrome

Finish: painted glossy
Color: onyx with red pinstripes on the body edges

Assassin

Outlaw PX3

Onyx - OGPX3O

Gun Metal - OGPX3GM

Specifications

Construction: bolt on
Body wood: basswood
Body thickness: 45mm
Top style: deep arched
Body binding: no

Headstock style: small traditional 3 to a side
Headstock color: painted to match
Headstock binding: no
Tuners: B.C. Rich diecast

Neck wood: maple
Back of neck: satin natural
Neck binding: no
Neck profile: thin
Neck thickness at fret 1: 19mm
Neck thickness at fret 12: 21mm
Neck radius: 430mm

Fretboard: rosewood
Inlay: Hollowpoint circles
Frets: 24 jumbo 2.7mm
Factory strings: 9 - 46
Scale: 25 1/2”

Bridge type: Tune o matic
Tailpiece type: string through
Pickups: 2 black Rockfield mafia humbuckers
Controls: 1 volume, 1 three-way toggle and 1 tone (the tone knob is a push/pull that acts as a coil tap. It taps out the two outer coils of each pickup.)
Hardware: black chrome

Special features: two end of body strap buttons for a custom strap fit and instrument positioning, revolver knobs
Finish: painted glossy
Color: gun metal or onyx

Outlaw PX3T

Onyx - OGPX3TO

Specifications

Construction: bolt on
Body wood: basswood
Body thickness: 45mm
Top style: deep arched
Body binding: no

Headstock style: small traditional 3 to a side
Headstock color: painted to match
Headstock binding: no
Nut: locking
Tuners: B.C. Rich diecast

Neck wood: maple
Back of neck: satin natural
Neck binding: no
Neck profile: thin
Neck thickness at fret 1: 19mm
Neck thickness at fret 12: 21mm
Neck radius: 430mm

Fretboard: rosewood
Inlay: Hollowpoint circles
Frets: 24 jumbo 2.7mm
Factory strings: 9 - 46
Scale: 25 1/2”

Tailpiece type: Floyd Rose original tremolo
Pickups: 2 black Rockfield mafia humbuckers
Controls: 1 volume, 1 three-way toggle and 1 tone (the tone knob is a push/pull that acts as a coil tap. It taps out the two outer coils of each pickup.)
Hardware: black chrome

Special features: two end of body strap buttons for a custom strap fit and instrument positioning, revolver knobs
Finish: painted glossy
Color: onyx

Assassin QX6

Tobacco Sunburst - AGQX6TB

Amber - AGQX6A

Specifications

Construction: neck through
Body wood: nato
Body top: AAA quilted maple veneer
Body thickness: 45mm
Top style: deep arched
Body binding: natural wood

Headstock style: small traditional 3 to a side
Headstock color: stained to match AAA quilted maple veneer
Headstock binding: no
Tuners: Grover Rotomatics

Neck wood: maple
Back of neck: glossy stained to match
Neck binding: no
Neck profile: thin
Neck thickness at fret 1: 19mm
Neck thickness at fret 12: 21mm
Neck radius: 430mm

Fretboard: ebony
Inlay: glyph
Frets: 24 jumbo 2.7mm
Factory strings: 9 - 46
Scale: 25 1/2”

Bridge type: Tone Pros tune o matic
Tailpiece type: string through the body
Pickups: 2 chrome covered Rockfield mafia humbuckers (direct mounted)
Controls: 1 volume, 1 three-way toggle, 1 tone, 3 mini switches – individual coil tap switches and a reverse phase
Hardware: chrome

Special features: two end of body strap buttons for a custom strap fit and instrument positioning, revolver knobs
Finish: stained trans glossy
Color: amber or tobacco burst

Assassin PX3T

Onyx - AGPX3TO

Specifications

Construction: neck through
Body wood: nato (eastern mahogany)
Body thickness: 45mm
Top style: deep arched
Body binding: white multi-ply

Headstock style: small traditional 3 to a side
Headstock color: onyx
Headstock binding: multi-ply white
Tuners: Grover Rotomatics

Neck wood: maple
Back of neck: onyx
Neck binding: multi-ply white
Neck profile: thin
Neck thickness at fret 1: 19mm
Neck thickness at fret 12: 21mm
Neck radius: 430mm

Fretboard: ebony
Inlay: white pearloid bird skull
Frets: 24 jumbo 2.7mm
Factory strings: 9 - 42
Nut: 43mm
Scale: 25 1/2”

Bridge type / Tailpiece type: Floyd Rose original tremolo
Pickups: 2 black chrome covered Rockfield mafia humbuckers
Controls: 1 volume, 1 three-way toggle and 1 tone. Tone knob is a push pull that is a coil tap that cancels the two outside coils of each humbucker.
Hardware: black chrome

Special features: two end of body strap buttons for a custom strap fit and instrument positioning, revolver knobs
Finish: painted glossy
Color: onyx

Assassin FX6

Trans Black - AGFX6TBK

Trans Blue - AGFX6TBL

Dragon's Blood - AGFX6DB

Specifications

Construction: neck through
Body wood: nato (eastern mahogany)
Body top: AAA Flamed maple book-matched veneer
Body thickness: 45mm
Top style: deep arched
Body binding: multi-ply white and abalone perfling

Headstock style: small traditional 3 to a side
Headstock color: stained to match AAA flamed maple veneer
Headstock binding: multi-ply white and abalone perfling
Tuners: Grover Rotomatics

Neck wood: maple
Back of neck: glossy stained to match
Neck binding: multi-ply white and abalone perfling
Neck profile: thin
Neck thickness at fret 1: 19mm
Neck thickness at fret 12: 21mm
Neck radius: 430mm

Fretboard: ebony
Inlay: abalone thorned vine
Frets: 24 jumbo 2.7mm
Factory strings: 9 - 42
Scale: 25 1/2”

Bridge type: Tone Pros tune o matic
Tailpiece type: string through the body
Pickups: 2 chrome covered Rockfield mafia humbuckers
Controls: 1 volume, 1 three-way toggle, 1 tone, 3 mini switches – individual coil tap switches and a reverse phase
Hardware: chrome

Special features: two end of body strap buttons for a custom strap fit and instrument positioning, revolver knobs
Finish: stained trans glossy
Color: dragon blood (deep trans red), trans blue or trans black

Exotic Classic ASM

Koa - XCAGK

Specifications

Construction: neck through
Body wood: nato (eastern mahogany)
Body top: koa veneer with ebony stringers
Body thickness: 40mm
Top style: flat with arm taper
Body binding: no

Headstock style: small traditional 6 to a side
Headstock color: koa veneer
Headstock binding: cream one ply
Tuners: B.C. Rich diecast

Neck wood: maple
Back of neck: glossy natural
Neck binding: cream one ply
Neck profile: thin
Neck thickness at fret 1: 19mm
Neck thickness at fret 12: 21mm
Neck radius: 430mm

Fretboard: ebony
Inlay: none
Frets: 24 jumbo 2.7mm
Factory strings: 9 – 42
Nut: 43mm
Scale: 25 1/2”

Bridge type: Tone Pros tune o matic
Tailpiece type: string through the body
Pickups: 2 zebra Rockfield mafia humbuckers
Controls: 1 volume, 1 three-way toggle and 1 tone (the tone knob is a push/pull that acts as a coil tap. It taps out the two outer coils of each pickup.)
Hardware: chrome

Special features: two end of body strap buttons for a custom strap fit and instrument positioning
Finish: clear glossy
Color: natural koa with ebony stringers

Exotic Classic Deluxe ASM

Spalt - XCDAGSM

Quilt - XCDAGQ

Specifications

Construction: neck through
Body wood: nato (eastern mahogany) with ebony stringers
Body top: spalted or AAA quilted maple veneer with ebony stringers
Body thickness: 40mm
Top style: flat with arm taper
Body binding: no

Headstock style: small traditional 6 to a side vintage
Headstock color: spalted or AAA quilted maple veneer
Headstock binding: black one ply
Tuners: Grover Rotomatics

Neck wood: maple
Back of neck: glossy natural
Neck binding: black one ply
Neck profile: thin
Neck thickness at fret 1: 19mm
Neck thickness at fret 12: 21mm
Neck radius: 430mm

Fretboard: ebony
Inlay: none
Frets: 24 jumbo 2.7mm
Factory strings: 9 – 42
Nut: 43mm
Scale: 25 1/2”

Bridge type: Tone Pros tune o matic
Tailpiece type: string through the body
Pickups: 2 zebra Rockfield mafia humbuckers
Controls: 1 volume, 1 three-way toggle and 1 tone (the tone knob is a push/pull that acts as a coil tap. It taps out the two outer coils of each pickup.)
Hardware: black

Special features: two end of body strap buttons for a custom strap fit and instrument positioning
Finish: clear glossy
Color: natural spalted maple with ebony stringers or AAA quilted maple with ebony stringers

Bass-guitars

Warlock Bass

Black - WBBK

Specifications

Construction: bolt on
Body wood: basswood
Body thickness: 45mm
Top style: beveled
Body binding: no

Headstock style: 4 in line pointed
Headstock color: onyx
Headstock binding: no
Tuners: diecast

Neck wood: maple
Back of neck: natural satin
Neck binding: no

Fretboard: rosewood
Inlay: white pearloid dots
Frets: 24 jumbo 2.7mm
Factory strings: 45 - 105
Scale: 34”

Bridge / Tailpiece: stop adjustable
Pickups: 1 P style
Controls: 1 volume and 1 tone
Hardware: chrome

Finish: painted glossy
Color: black

NT Beast Bass

Onyx - NTBSTBO

Specifications

Construction: Neck through
Body wood: nato (eastern mahogany)
Body thickness: 45mm
Top style: beveled
Body binding: no

Headstock style: Beast
Headstock color: onyx
Headstock binding: no
Tuners: diecast

Neck wood: maple
Back of neck: onyx
Neck binding: no

Fretboard: ebony
Inlay: white pearloid small diamond
Frets: 24 jumbo 2.9mm
Factory strings: 45 – 105
Scale: 34”

Bridge / Tailpiece: 1 piece adjustable
Pickups: 2 P style
Controls: 1 master volume, 1 treble, 1 bass and 1 blend (active EQ)
Hardware: black

Finish: painted glossy
Color: onyx

Virgo Vintage Celtic Bass

Onyx - VOBO

Specifications

Construction: bolt on
Body wood: nato (eastern mahogany)
Body thickness: 45mm
Top style: beveled
Body binding: no

Headstock style: SOB Beast
Headstock color: onyx
Headstock binding: no
Tuners: B.C. Rich diecast

Neck wood: maple
Back of neck:onyx
Neck binding: no

Fretboard: ebony
Inlay: white pearloid Celtic
Frets: 24 jumbo 2.9mm
Factory strings: 45-105
Scale: 34”

Bridge/Tailpiece: adjustable stop
Pickups: 2 black P style B.C. Rich
Controls: 1 volume, 1 treble, 1 bass and 1 blend (active EQ center detent)
Hardware: distressed pewter

Special features: Celtic control knobs
Finish: painted glossy
Color: onyx

Heritage Classic Mockingbird Bass

Trans Black - HCMBTBK

Trans Red - HCMBTR

Trans Black - HCMBTBK

Specifications

Construction: neck through
Body wood: nato (eastern mahogany) rosewood stringers and AAA quilted maple veneer top
Body thickness: 45mm
Top style: beveled
Body binding: no

Headstock style: traditional 2 to a side
Headstock color: paint to match with AAA quilted maple veneer
Headstock binding: no
Tuners: B.C. Rich diecast

Neck wood: maple
Back of neck: natural glossy
Neck binding: white single ply

Fretboard: ebony
Inlay: white pearloid clouds
Frets: 24 jumbo 2.9mm
Factory strings: 45 – 105
Scale: 34”

Bridge / Tailpiece: 1 piece adjustable
Pickups: 2 P style
Controls: 1 volume, 1 treble, 1 bass, and 1 blend (active EQ center detent)
Hardware: black

Finish: stained trans glossy
Color: AAA quilted maple stained trans red with rosewood stringers and natural maple center or AAA quilted maple stained trans black with rosewood stringers and natural maple center

NT Warlock Bass

Onyx - 4 string - NTWBO

Onyx - 5 string - NT5WBO

Specifications

Construction: Neck through
Body wood: nato (eastern mahogany)
Body thickness: 45mm
Top style: beveled
Body binding: no

Headstock style: Widow
Headstock color: onyx
Headstock binding: no
Tuners: diecast

Neck wood: maple
Back of neck: onyx
Neck binding: no

Fretboard: ebony
Inlay: white pearloid small diamond
Frets: 24 jumbo 2.9mm
Factory strings: 45 – 105
Scale: 34”

Bridge / Tailpiece: 1 piece adjustable
Pickups: 2 P style
Controls: 1 master volume, 1 treble, 1 bass and 1 blend (active EQ)
Hardware: black

Finish: painted glossy
Color: onyx

Zombie Bass

Onyx - NTZBO

Onyx - NT5ZBO

Specifications

Construction: Neck through
Body wood: nato (eastern mahogany)
Body thickness: 45mm
Top style: beveled
Body binding: no

Headstock style: Widow
Headstock color: onyx
Headstock binding: no
Tuners: diecast

Neck wood: maple
Back of neck: onyx
Neck binding: no

Fretboard: ebony
Inlay: white pearloid small diamond
Frets: 24 jumbo 2.7mm
Factory strings: 9 - 42
Nut: 43mm locking
Scale: 25 1/2”

Bridge / Tailpiece: Floyd Rose original tremolo
Pickups: 2 B.C. Rich B.D.S.M. humbuckers
Controls: 2 volumes, 1 tone and 1 three-way toggle
Hardware: black

Finish: painted glossy
Color: onyx

WMD Widow Bass

Onyx - W5WIBO

Specifications

Construction: neck through
Body wood: nato (eastern mahogany)
Body thickness: 45mm
Top style: side beveled
Body binding: no

Headstock style: Widow
Headstock color: onyx
Headstock binding: no
Tuners: Grover Rotomatics

Neck wood: maple
Back of neck: onyx
Neck binding: no

Fretboard: ebony
Inlay: none
Frets: 24 jumbo 2.9mm
Factory strings: 45 – 130
Scale: 35”

Bridge / Tailpiece type: adjustable stop
Pickups: 2 active EQ black P style
Controls: 2 volumes and 2 tones (center detent)
Hardware: black chrome

Finish: painted glossy
Color: onyx with red pinstripes on the body edges